TDL High
Quality Low Pressure BC / Drysuit Hoses with 3/8" male connector. Our
hoses are 5/16" ID have a working pressure of 250 psi and a burst
pressure of 1,200 psi. We use American made rubber covered braided hose with American manufactured fittings.
The 3/8" male connector fit all 1st stages with a standard 3/8" port.
We
list the most popular sizes used. If there is a specific size you need
that is not shown e-mail us or order the one closest to the size you
need and make a note in the comment section and we will make up that
size for you. (allow 1 week for non-stock sizes)
ANSI requires a 5 to 1 rating, which is 400 psi working
pressure. We have increased the safety rating for the working pressure
to a 8 to 1 rating, hense marking the hose 250 psi working pressure. The
marking is just for ANSI and Safety rating.